Free Shipping On Orders Over $100

Bike Finder

FIND PARTS
Nuetech NITRO PROLINX 220 SET- 4pcs - 80/100-21
Purchase Nuetech NITRO PROLINX 220 SET- 4pcs - 80/100-21

Nuetech NITRO PROLINX 220 SET- 4pcs - 80/100-21

SKU: PROLX-220 Brand: Nuetech
No reviews yet.
$147.95 $140.55
Available to purchase
 
Share this with your friends
Join Waitlist

Sign up with your email to be notified when this is back in stock!


Description

Flat-proof confidence. Adjustable feel. Progressive support.

The Nitro PROLINX Adjustable Mousse Tire Insert Set combines flat-proof performance with a sectional design that lets you tune tire feel for your riding conditions. Each set uses four LINX sections made from nitrogen-energized, super-viscoelastic material, delivering firm support near the rim and a softer, more compliant feel beneath the tread.

From a super-soft setup for technical terrain to a firmer feel for added support, PROLINX offers an adjustable pressure-equivalent feel ranging from approximately 6 psi to 16 psi. Select the correct tire-size option, then follow the included TUNING LINX guide to build your preferred setup.

Progressive Density Technology

PROLINX starts as straight sections of uniform-density material. When installed inside the tire, the microcells compress around the rim and expand around the tire's crown, creating a progressive support profile.

  • Firm around the rim and sidewalls: Helps support cornering stability, steep side-hill control, and rim protection.
  • Softer beneath the tread: Promotes traction, bump absorption, and a plush, planted ride.
  • Flat-proof mousse design: Supports the tire without relying on an inflated inner tube.
  • Adjustable sectional construction: Lets you tailor fit and feel to the tire and riding conditions.
  • Lightweight material: Nitrogen-energized, super-viscoelastic construction developed for off-road performance.
  • Wear compensation: Wedge material can be used to re-stuff the system as it wears, helping maintain the desired feel and extend usable life.

Tune the Feel to Your Ride

The four-piece design makes one LINX section your tuning section. Follow the supplied guide to cut that section to the specified length, then install it with the other three full-length sections.

  1. Choose your desired tire feel using the included TUNING LINX guide.
  2. Cut the tuning section to the recommended length.
  3. Install it with the three remaining full LINX sections, following the supplied mousse installation instructions.

The 6-16 psi range describes tire feel, not actual air pressure. PROLINX is an airless mousse system; adjustments are made to the insert configuration. The sectional design also allows further adjustment after the initial installation.

What's Included

  • Four Nitro PROLINX sections in the selected size
  • Cooling gel
  • Installation instructions with the TUNING LINX guide

Available Sizes and Part Numbers

Select the set intended for your tire size. Fitment is determined by the tire application rather than motorcycle model and year alone.

Part Number Intended Tire Size
PROLX-220 80/100-21
PROLX-235 90/100-21
PROLX-285 110/100-18
PROLX-305 120/100-18
PROLX-325 140/80-18

Related Accessories

  • NMLUBE 150: Replacement lube, 150g tube, available separately.
  • PROLX-SK1: Nitro PROLINX sticker kit, available separately.

Watch the Nitro PROLINX Video

Watch the Nitro PROLINX video on YouTube

Nitro PROLINX Installation & Tuning

Install three full LINX, measure the gap, then cut the fourth to set your preferred tire feel. Follow the front or rear settings below.

Off-road use only. No street or highway use. Do not exceed 75 mph. Higher speeds can cause premature wear, damage, or failure.

Before you start

  • Confirm fitment: Check your exact tire brand, model, size, and rim width in the Nuetech fitment guide. Identically marked tires can have different internal volumes. If the PROLINX match is unclear, confirm it with Nuetech before mounting.
  • Use a working rim lock: A properly fitting, functioning rim lock is required to prevent tire slip.
  • Seal lubricant escape paths: Check used tires for holes and plug them. Tape over unused rim holes.
  • Review the supplied illustrated instructions: Watch Nuetech’s mousse mounting video for general mounting technique. Have a qualified shop install the mousse if you lack the correct tools or are not confident with the procedure.

1. Lubricate the tire

Squeeze the entire tube of supplied silicone-based lubricant in a thick bead along the inside crown of the tire, directly beneath the tread. It will distribute as you ride.

Never install PROLINX without proper silicone-based mousse lubricant. Do not substitute tire mounting paste.

2. Insert three full LINX

Place three uncut LINX inside the tire. Push the adjoining ends firmly together, leaving one gap for the fourth section.

3. Measure the remaining gap

Measure the gap at its shortest point, straight across the opening at the inside edge of the LINX.

Use a tape measure, or lay the fourth LINX beside the tire and mark the gap length on it as shown in the supplied diagram. The thin dotted marks are spaced 1 inch apart.

4. Calculate and cut the fourth LINX

Choose a setting and use the adjustment for your wheel. PSI values describe approximate tire feel, not air pressure. PROLINX is an airless mousse system.

Fourth LINX cut-length adjustments
Setting PSI feel Front Rear
Firm 13–14 +5 in. +3 in.
Standard 11–12 +4 in. +1 in.
Soft 9–10 +3 in. −1 in.
Extra soft 6–8 +2 in. −3 in.

Start with the measured gap. Add inches for a plus (+) value or subtract inches for a minus (−) value. The result is the total length of the fourth LINX after cutting.

Examples with an 8-inch gap:
Firm front: 8 + 5 = 13 inches long.
Soft rear: 8 − 1 = 7 inches long.

Cut the fourth LINX to the calculated length using a large knife or fine-tooth hacksaw. Soapy water on the blade helps make a smoother cut; it does not replace mousse lubricant.

Optional ultra-low setup for hard enduro: Cut the fourth LINX 5 inches shorter than the measured gap. Nuetech specifies a full 10 minutes of riding for the LINX to elongate and space out.

5. Fit the fourth LINX and mount the tire

Fit the cut section into the tire and mount it using proper mousse installation technique. Position the rim lock at the center of a full-length LINX section.

If a long fourth section is difficult to seat, use the arrangement shown in Step 5 of the supplied illustrated instructions to press the raised ends into the tire.

Break-in, maintenance & storage

  • Let the setup settle: Allow 2–3 heat cycles for break-in. Tire construction can change the pressure-equivalent feel by 2–3 psi. After break-in, add or remove mousse material as needed to fine-tune the feel.
  • Re-lubricate when needed: Lubricant loss shortens mousse life. If lubricant leaks from the tire or rim, re-lubricate promptly. After high-speed use on hard off-road surfaces, remove, inspect, and re-lubricate the LINX after each day’s use.
  • Monitor tire support: Mousse softens with use. Re-stuff or replace it before it becomes too soft or unstable. If instability develops while riding, slow to a controlled speed, stop safely, and inspect the mousse before continuing.
  • Expect service life to vary: Speed, ambient temperature, riding intensity, and terrain affect how long PROLINX lasts.
  • Store with both wheels raised: Use a stand when the bike is parked for extended periods to help prevent flat spots.
  • Brand: Nuetech
  • UPC: 857600007553

Reviews

There are no reviews yet so why don't you use the form here and be the first to submit a review?

Review Nuetech NITRO PROLINX 220 SET- 4pcs - 80/100-21

Rate and Review Nuetech NITRO PROLINX 220 SET- 4pcs - 80/100-21

Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy.

Fits the items below

- Universal fit item -