Sale!

NITROMOUSSE PLATINUM 10-12 PSI FEEL - 80/100-90/90-21

NITROMOUSSE PLATINUM 10-12 PSI FEEL – 90/100-21

Name: NITROMOUSSE PLATINUM 10-12 PSI FEEL - 90/100-21
Brand: NUETECH - NITROMOUSSE - TUBLISS
SKU: NM21-235.
Availability: InStock

Original price was: $139.95.Current price is: $125.99.

CONFIRM MOUSSE SIZE BEFORE ORDERING

SIZE CHART

What is NITROMOUSSE?

NITROs are 100% FLAT PROOF, HIGH PERFORMANCE foam innertubes that replace traditional pneumatic innertubes.

Advancing performance on the molecular level. Over a decade of R&D has been invested into the state of the art nitrogen charged micro matrix elastomer for the Nitro Mousse. The results are 100% flat proof foam tube that provides huge traction gains, a more lively consistent feel, increased cornering stability and unrivaled durability.

Features:

Enjoy every precious second of your ride with 100% flat proof dependability
Our nitrogen charged technology provides a more lively consistent feel with increased cornering stability
Unrivaled durability: Lasts up to twice as long as other popular mousses providing much more bang for your buck!

NITROs are high tech foam tubes made from proprietary elastomers that have millions of nitrogen charged micro-cells. This means that you can cut, puncture, tear, and hammer our NITROS and they will continue to perform, giving you confidence to finish the race or make it back out of the trail without concern. NITROs also come in two different PSI feels, The 10-12spi Platinum and the 6-8psi Plushie.

We also offer the NITROWEDGE, a short section of mousse that allows you to increase the psi feel or extend the life of one with many hours on it.

Which NITROMOUSSE should I use?

PLATINUM = 10-12 psi “STANDARD” feel NITRO: Best for all around riding, everything from single track to moto or wide open desert.

PLUSHIE = 6-8 psi “SOFT” feel NITRO: Best for slower speed technical riding like endurocross, and hard enduro riding.

What is NITROWEDGE?

NITROWEDGE is simply an 8″ section of a NITRO that can be added to increase the psi feel of a NITROMOUSSE.

NITROWEDGE allows you to increase the PSI feel of any NITROMOUSSE by adding foam volume to the current mousse, giving you the ability to “tune” the psi feel.

You can also use it to increase the psi feel of a NITRO that has a lot of hours on it and make it last even longer. Get more bang for your buck with NITROWEDGE!

NITROLUBE Cooling Gel

NITROLUBE is an ULTRA high-quality silicone based lubricant that substantially reduces heat buildup in your tire. This is critical in getting the longest life out of a NITRO. No other lubricant works better to ensure the life of your NITRO.

NITROLUBE is a high-quality silicone based lubricant made specifically for our NITROMOUSSE. It substantially reduces friction, dispersing heat and ensuring a long life of your NITRO
Because of the high efficiency of NITROLUBE only 1 tube per install is needed.
You do not need to re-lube as long as any extra valve holes in your rim are covered and you are not losing lubricant.

CAUTION! DO NOT USE SOAP BASED lubricants (like Murphey’s) with a NITRO, as mounting pastes are only meant to be temporary and then dry up. These types of lubricants WILL cause premature wear and or failure.

INSTALLATION

NITROMOUSSE INSTALL INSTRUCTIONS

Simple and Pinch-Free

Quick Tips

1st: Always MAKE SURE you have the correct size mousse for your specific tire.

2nd: ONLY use NITROLUBE or a high quality silicone based gel lubricants that are rubber-safe (like Napa Sil-Glyde PART#7651346) when mounting (do not use tire mounting paste or other non-silicone based lubricants as they will dramatically shorten the operating life of the NITRO).

3rd: Installation is all about technique. Getting the BEAD of the tire to drop into the center of the RIM is the MOST IMPORTANT aspect of it, and using bead ramps (see video) is the key. This is also what allows the tire to go on with less effort. ALSO be cautious when using long levers, and just forcing the tire on as you can break the tire’s bead. On the up-side there is no risk of damage to the nitro by pinching it.

SKU: NM21-235. Categories: NUETECH - NITROMOUSSE - TUBLISS, Tires

Additional information

Additional information

Weight	4.3 lbs
Dimensions	26 × 26 × 4 in